Question about HZL-E61 Computerized Sewing Machine
Juki HZL-E61: cannot get tension right on straight stitch Back side of fabric thread loose. If I adjust thread tension on machine, it gets loops on back. Tried re threading machine, cleaned dust from ...
...Right 2-Check the upper thread tension 3-Change the needle 4-Check the bobbin tension 5-Use silicon on a sponge and have the thread drag thru it. 6-??? #5 helped me figure out my problem. as your ...
Question about MO-644D Mechanical Sewing Machine
loops cross over on both sides - wavy pattern develops I have tried adjusting all thread tension, stitch length, differential feed settings and no matter what I do the loops keep crossing over on the ...
Question about MO-654DE Mechanical Sewing Machine
My overlocker thread tension is not correct how do I adjust it Juki Mo634de threads are looping to loose EBAY ITEM 160454752052
Question about MO-644D Mechanical Sewing Machine
Hello, I have an older Juki serger and it's great! BUT, lately I have been getting loops of thread on the underside, especially when serging thicker things, like sweaters. I have serged plenty of ...
Thread doesn't catch/loop. The thread does not catch or loop. It just comes straight through as if I've only threaded the machine. I've changed needles and rethreaded the machine several times. It may
Question about MO-644D Mechanical Sewing Machine
...tightening the top tension solves bottom looping! . re-thread your machine with a rainbow of colors. (important that you remove the existing threads if you are not sure it is threaded
Question about TL2000Qi Sewing & Quilting Machine TL-2000Qi, 6x9" Arm Space, Extension Table, Drop Feed, Knee Lever 1/2" Foot Lift, Walking Foot, 6 Feet TL98Q
Why does my bobbin thread keep sticking? My bobbin thread runs smoothly for a few stitches then it sticks and causes gathers in the fabric. I have bought new bobbins, rethread the bobbin and adjusted ...
Question about TL2000Qi Sewing & Quilting Machine TL-2000Qi, 6x9" Arm Space, Extension Table, Drop Feed, Knee Lever 1/2" Foot Lift, Walking Foot, 6 Feet TL98Q
...Top thread is not binding (over tension) or snagging on the spool. This has a transparent bobbin cover? If yes manually advance machine with the hand wheel, keep an eye on the bobbin case, do you ...
Question about TL2000Qi Sewing & Quilting Machine TL-2000Qi, 6x9" Arm Space, Extension Table, Drop Feed, Knee Lever 1/2" Foot Lift, Walking Foot, 6 Feet TL98Q
...an unusual machine. I have never seen one before. Here is the manual :>D https://www.babylock.co.jp/new_site/wp-content/uploads/2017/11/CM-606.pdf CM-500 ...
Usually answered in minutes!
204 Questions
118 Questions
101 Questions
98 Questions
27 Questions