Questions & Answers for: Janome co on a loop

looped bottom thread I have tried every thing that is suggested and the bottom thread is still looping any ideas. It was working fine then started looping the thread Sorry I missed your problem, I ...

...loop, could you please help me? please email me back on mjciro@hotmail.co.uk. thank you Maria I am after an older style janomelock JD-634 manual. it is an older overlocker.i just need help with the ...

...bobbin thread is usually due to the machine being threaded with the foot down. Foot up - tension control opens; foot down - tension control closes. When the tension control is closed, the thread ...

I just bought a memory craft 6600 the thread from the bobbin keeps looping on the top fabric? When I change the tension number it just gets worse Help Check your threading, especially your bobbin ...

janome 4400 bought new bobbin holder but still have lots of issues with thread looping while sewing. The repair person says I pull the thread forward after cutting it and undo the proper bobbin ...

The top stich is loose on my Janome Harmony 8100, I have cleaned and changed bobbins, but nothing seems to help. Ok, Let's understand exactly what is going on. You said. "the top stitch is loose." So ...

...have you tried adjusting the top thread tension? it might be the needle and the thread are not compatable,, the needle may be to light for the thread. if the suggestions don't help, sew on the ...

machine is jammed, it seems that the upper loop and lower loop are colliding and it seems to be jammed and not able to sew or run properly! have any idea how i can fix it? I tried adjusting the lower ...

thread loops while I sew i should know whether the loop is upside or downward, its opposite tension adjustment , if the loop is downward position, tighten the upper thread tension , if the loop is ...

...Bonus Unpick it Serger... Make It Handmade Perfecting Serger Overlocker Tension ...