Questions & Answers for: Honda VTX 1300 S clutch oil

operating temp. Noise is not coming from the top. timing chain loose? Piston slap? Rod knock? Loose clutch spring

clutch teeth, too. If you see metal/brass or aluminum shavings in the case drain plug, oil or on the bottom of the gearcase...that isn't a good sign. This sounds like a trans issue, not a clutch issue

...clutch sqawks sometimes happens in second also could the oil I am using cause this problem Mobil 1 V twin synthetic 20/50 I know that on motors where the clutches lube off crankcase oil synthetic oil ...

how do i change oil and what parts do i need on my honda vtx 2006 Consult your service manual for instructions on how to change your oil here: ...

...adjustment by vibration. If the kick stand switch is out of whack, it will restart as long as the clutch in pulled in. But as soon as you try to let out the clutch it will kill the engine, if it is ...

I recently bought a 2006 Honda VTX 1300. I need to take it in for 8,000 mi service but will not be able to for several weeks. I checked oil level and it is good but i noticed on the bottom of the bike

...clutch cable? If you are using an automotive oil , it may be causing the issue. You can use any oil that is JASO MA certified motorcycle oil. 10w-40 for cold climate. 20w-50 for warm climate/touring. ...

checking oil level Remove dipstick from left side of bike and wipe it clean. Sit on bike and stand it straight up. Insert dipstick and do NOT screw it in. Remove dipstick and see where your oil level ...

Loss of power at high rpm - Honda VTX 1300 Are you hitting the Rev limiter? Have you serviced your bike recently? Do you have a question? When did you last replace the clutch plates?

...on a 05 vtx 1300c? My 1300 C will start in Neutral but die when I shift it into gear. Yes the clutch is engaged and yes the kickstand is up. Based upon what I have been told, it may be the ...