...clutch peddel, and one to open bleeder, same as bleeding breaks, the person pushing peddel pumps peddel a few times and the last time holds to floor, other person opens bleeder to let air out, and ...
...bleeder? to drain the clutch? Drain or bleed? The bleeder nipple is on the slave cylinder. Fill master cylinder,leave the cap loose, open the bleed nipple at the slave cylinder,and let gravity do the ...
...clutch pedal stays soft as can be and sticks to the floor. i am told it is either my slave cylinder or master cylinder....any way to check these to be sure or if it could be something else? yes, ...
...6 CYLINDER HAS CLUTCH MASTER CYLINDER AND SLAVE CYLINDER, CHECK FLUID LEVEL AND BLEED CLUTCH SYSTEM AT SLAVE CYLINDER BLEEDER. HAVE NOT HEAR OF CABLE CLUTCH SYSTEM. ONLY HYDO.& LINKAGE. GOOD ...
...bleeder valve for the master cylinder on a 2001 nissan maxima with a manual transmission i will assume that you are referring to the clutch master cylinder , you bleed the system at the clutch slave ...
...wher is the bleeder valve on 04 nissan maxima clutch located? There are 2. One is on the side of the master, and one is located on top of the slave. Some aftermarket slaves have them on the
i need to know where the bleeder is for the clutch on a 98 nissan maxima Clean off the slave clutch cylinder 1st. Look for protective dust cap.
...bleeder by the intake/filter box. The push rod on the slave bearely moves when pumping the clutch. Is there something I'm doing wrong? Please, I could use some experienced helpful infomation. Thanks. ...
bleed clutch need to bleed clutch how do i Go to AUTOZONE,get a bleeder kit,not much and it has instructions on it,easy to use.
Question about 2000 Maxima
...clutch pedal a few times and hold to floor and you open bleeder valve at slave cylinder till air is gone,just don't let resevoir get low.Here is a link to bleeding,your slave cylinder is bolted to ...
Usually answered in minutes!
1,309 Questions
1,122 Questions
1,007 Questions
857 Questions
783 Questions