Question about 1992 Escort 4 Door
...bleeder screw....sometimes this can take a while.epically if you don't bench bleed the new master.(some clutch masters Ive seen (ford especially) take a lot of pumping literally hundreds of pumps) ...
...clutch pedal depressed, loosen the bleeder screw to release the fluid and air. Tighten the slave cylinder bleeder screw. Repeat steps 3 through 5 until no air bubbles appear in the fluid. Tighten the ...
bleeder screw and pump the clutch again, you may have to do this a few times b4 the fluid comes through, when you get a constant flow of fluid coming through shut the bleeder valve and pump the clutch
...bleeder screw cap from the clutch slave cylinder and attach a hose to the bleeder screw. Place the other end of the hose into a container to catch the fluid. Have an assistant slowly pump the clutch ...
...bleeder on the clutch slave cylinder. Only have the person working the clutch pedal release the clutch after you have retightened the bleeder. AND FOR GODS SAKE AND YOUR OWN DO NOT HAVE THE VEHICLE ...
clutch to the floor,, and hold it, you need to loosen the bleeder valve at the slave, ( master cylinder) and then tighten it again , once the fluids stop coming out,, have let the clutch out, and then
...of trans case. bleeder on slave cylinder. crack bleeder with clutch applied. (pump up and hold). do same thing until stright fluid comes out of bleeder.. clutch should be solid after this
Usually answered in minutes!
2,142 Questions
1,335 Questions
1,118 Questions
957 Questions
841 Questions