Questions & Answers for: Chevrolet where is the clutch bleeder

...check on on master cylinder keep fluid level full.to keep air from being drawn through the master cylinder.never release a depress clutch pedal with bleeder screw open.or air will enter the

Ad

...clutch is active right off the floor and does not fully return to the up position! open your bleeder and pump it dry. when it empty titen the bleeder .and fill you it up . open bleeder and let it get ...

Ad

...clutch hyd system is to connect a hose from the closest front brake caliper bleeder to the bleeder on the slave cylinder. Crack both bleeders open and pump the BRAKE pedal very slowly. It might be ...

...pushing clutch pedal down and holding until bleeder is closed. repeat until solid fluid comes out, then with bleeder closed pump clutch pedal three times and open bleeder to relieve any left over

Question about 1998 Cavalier

1 Answer

...bleeder screw on the clutch actuator assembly and submerge the other end of the hose in a container of hydraulic clutch fluid. Depress the clutch pedal slowly and hold. Loosen the bleeder screw to ...

...clutch does the slave cylinder have a bleeder? it should. auto parts stores sell hand-operated vacuum pumps for bleeding brakes. i have used mine to pull fluid through clutch hydraulics to get enough ...

Question about 2001 Camaro

1 Answer

...bleeder on the clutch actuator and submerge the other end of the hose in a container of fluid. We need to know where/what the clutch actuator is, is it easy to get to, and is the another name (alis) ...

Question about 1992 K1500

1 Answer

...bleeder before the clutch pedal is released. If a helper is not available to depress the clutch you can run a hose from the bleeder to a container with enough fluid in it to keep the hose covered, ...

Question about 2003 Tracker

1 Answer

...the 3rd pump hold the clutch and havethe other person open the bleeder screw with a 10 mm wrench. fluid will come out . do not let the clutch go until the person closes the bleeder screw .do it 3 ...

Question about 1995-1997 Chevy 1500 Truck Ignition Starter Alarm Switch

1 Answer

...bleeder and pump the clutch pedal to see if it is starting to work. If not, repeat opening the bleeder again etc. If you get a little pedal, then hold the pedal to the floor and have someone open the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...