Questions & Answers for: Ford Mustang clue suspect

came on and it started making a dull whistling sound whenever I hit 1500-1800 RPM range. I have no clue at all where exactly it is coming from... it sounds like it may be a vacuum line that is loose.

...either are the problem.I have heard the interlocks cause problems with the computer but have no clue. How can I fix this? remove the interlock and see if eveything returns to ...

...lock but that did not solve the problem. I am now going to try replacing the ignition switch. Any clue? the ign switch should take care of it i agree with you shack Ignition switch actuator is ...

...the system to it norm stats but no change. I have tried to locate my relay switch but have no clue where it is located under the hood. it is in the fuse panel compartment that is located under ...

beeper sounds when the vehicle is placed in reverse. I took it to the dealer and they didn't have a clue. Look around the rear end to see if there is a buzzer anywhere

...clue what it could be vacuum, timing is off, i dont know Odds are that the broken belt took out a vaccume line while it was flailing around,that would be the first thing that i would check for.Any ...

...circuit something. i replaced the camm sensor, crank sensor, crank sensor connector and the ecm. no clue on what it could be. if you have any answers please let me know I wouldn't expect a ...

after starting, idle will not drop below 1500 rpm engine races. apparent vacuum leak. how do I locate this leak? Easiest way to check for a vacuum leak is to spray some carb cleaner where you suspect ...

My car is running hot and my heat/defrost is blowing out cold air. Im unsure if i have a clogged heater core that needs flushing or if the thermastat needs replacing...and wondering how much each ...

I have what sounds like a squeaky bearing sound at any speed. Varies with RPM. Looking for likely culprits. 6-banger. Replaced alternator roughly 2 years ago. Replaced serpentine belt 6 months ago. ...