Questions & Answers for: close all covers

Close top cover The printer has an error saying close top Cover. The cover is closed. What to do? Start by trying this. Open the cover and look around for openings in the where the cover closes. In ...

STATES THAT TO CLOSE TOP COVER TO CONTINUE TOP COVER IS CLOSED BUT RED INDICATOR LIGHT IS STILL FLASHING THEREFORE NOTHING WILL PRINT! 1. The top cover hinges are not connected to the ink slider bar ...

hp 7410 officejet all in one message reads to close cover - when cover is closed - will not scan copy or fax at all --close cover ---means the lower base of the printer is open the cover you open when

...appears closed. Make sure the covers are completely closed. Open each section an close it making sure it closes with a click. Also check for covers under other covers. Hope this is of some help. ...

...top covers (one opens to the right one to the left). Close the cover that opens toward the right 1st (you should hear it click into place) then close the second cover. Press "ok" should be good to

" please close ink cover" " please close ink cover" what is this mean? i'm using DCP-195C brother printer?how to fix it? it said "close ink cover". might be not properly covered or maybe ...

close printer cover error when cover is closed The cover sensor might have dislodged or not in its proper position. You could try to reset your printer to determine if there's a hardware fault. Remove

my konica bizhub 163 gives massage 1st side cover open close 1st side cover,how do i clear the massage. pliz help me. 1st Side cover is front cover.The cover which you use to open to install or check ...

...Close Front Cover" Check the front cover actuator, switch. If all covers, switches is working fine, probably power supply is faulty. Toshia E-Studio 2330c gives error message "Close Front Cover". The ...