model 116 hose clog? My old cannister model 116 followed with numbers 2839580 marked Kenmore 3.9 with power-mate, worked fine until the bag got overly full. I have changed the bag, cleaned the filter,
Question about 2971AV EZ Kleen Bagless Upright Vacuum
4870MZ Eureka The Boss Smartvac - Red tube on side of the vaccum that goes to the top is clogged and i cannot remove it to clean it out. the clog is stuck and cant get it to move. How to I remove it ...
Question about Lift-Off(R) Revolution(R) Turbo Upright Vacuum
Bissell Lift-Off Revolution keeps clogging Every time I use my vacuumn(it is the Turbo model) the debris gets stuck before it makes it to the canister bucket where you would take off to empty the vac.
clogged hose... I have a clog in my hose, probably a sock, I have pushed it through to the hard plastic handle end of the hose, help! can the plastic handle wand be disconnected from the hose to ...
Question about 6594 PowerForce Bagless Upright Vacuum
35922, sounds like there is a clog , have cleared hoses, put new bag in loss of suction, still hear loud clogged noise near rear vent hole Try putting the vacuum hose end into vent hole while running.
Question about DC07 Bagless Upright Cyclonic Vacuum
Dyson DC 24 is clogged, not suctioning. How can I check the tubes for a clog? I removed the flexible tube sections and blew compressed air in reverse flow path to remove the clog. however I have ...
dyson clogs at main intake Dyson clogs at main intake . Cleaned entire unit, it appears to work fine and within 15 minutes it is clogged again. check both of your filters they are probably clogged ...
Question about DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum
...a screen at the bottom of the tank/vacuum. Simply remove/clean anything that may be covering/clogging any of the
I think the power head is clogged with pine needles. The carpet head is not picking up. How do I open it to clean it out? Make sure you have suction at the end of the hose. If not, the clog is most ...
vacuum is clogged Where are the clog ports located Without specifics of Model, I can't tell you how. There are no clog ports in Dirt Devil vacuums. Usually a hose has to be removed to unclog. Mine ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions