...Thanks! dont have the manual?? Turn ignition on (without starting) and rotate the spindle under the clock- clockwise for minutes and anti-clockwise for hours. You may need to hold or press the Trip ...
how do i set the clock on my vw bora 2001 i recently changed the battery on my vw bora 2001 and need to reset the clock, how do i do this? if you have a digital clock there should be a plastic pin ...
...then turbn ignition on, service now or wrench should dipslay, then press the min button for your clock. this should reset reminder. if any questions, please reply ...
...pressed(keep pressed all the time basically)while holding mileage reset left turn your didgital clock then your service light should be off! ive done it on my 05 plate
...Turn ignition on. The display read service, While still holding the trip button turn the left clock adjustment arm to the right or if you were adjusting the minutes on the clock, Release both ...
...5 seconds, start the car while still pushing the wrench button and then push the min button on your clock. You must be holding the wrench button and the min button at the same time to reset the ...
...on. press and hold the milelage button turn on the ignition lights do not start, press and turn the clock button clockwise for 20 seconds release and that should be job done. ...
...clock setting button to the right and hold for a few seconds until service light resets. PRESS AND HOLD TRIP BUTTON LEFT OF SPEEDO Switch ignition on Service will appear in trip display Release trip ...
clock button on the facia and whilst holding it in switch on the ignition....release the right hand button and then turn the left hand button to the right...this resets the service indicator light and
...itself my clock and trip mileage keep resetting themselves to zero,can you help me with this problem Hi. There is a fuse for the dash cluster that keeps the time etc going. Chec k this fuse is not ...
Usually answered in minutes!
1,322 Questions
1,089 Questions
831 Questions
844 Questions
677 Questions
