Questions & Answers for: Neff over clock fail Lands Phones

Question about B1432 Single circotherm plus Electric Oven

1 Answer

...not working. The fan turns freely if spun by hand. All other elctrics (hob spark, grill element, clock etc. seem fine. I have not removed the oven from its housing yet. Replacing the element alone ...

Ad

Question about 24 in. S5543X2 Built-in Dishwasher

1 Answer

of the dishwasher, or behind the lower access panel. It is either a mechanical device like a simple clock, or it's completely electronic with just a digital readout. The timer runs the dishwasher in a

Ad

Question about U1421 Double circotherm Electric Oven

1 Answer

...circuit breaker when it failed. But the top oven still works. Probably the ring element. If the clock is flashing zeros or 8's the bottom oven will not operate but the top will. Make sure the ...

Question about B1428 Nostalgic Single circotherm Oven

1 Answer

oven fan not working Check the clock is in manual mode. If it is and the fan is still not operating but you can see the element glowing behind the back panel, the fan has probably failed and needs ...

...clock resets then something is causing power interruptions to the board. If your oven has internal fuses, a wiring or component problem could have caused a fuse to blow. A blown fuse is an indication ...

Question about U1461 Double circotherm plus Electric Oven

1 Answer

top oven is fine. Why doesn't bottom oven work? clock needs to be set if ok then element failed.

...the control knob and inside the oven does not come on. Could you tell me what the problem might be? clock must be set for bottom oven to work not flashing 00.00 if clock set check its not on auto ...

...clock resets then something is causing power interruptions to the board. 5. 6.Even a bad relay door switch will hinder your oven from operating. If your oven has internal fuses, a wiring or component ...

Not finding what you are looking for?

Categories:

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...