Questions & Answers for: GE over clock fail Microwave Ovens

Clock Trips Microwave oven installed one year..Clock trips at the start of defrost or reheat cycles..not everytime but more frequent now. Are you saying that the oven seems to shut off while cooking? ...

...xl microwave oven JVM1440 Two weeks ago after I press 6-express cook stopped and all the lights and clock went blank. In a 10-15 minutes it came back on and the clock would have to be reprogrammed. ...

...doing so, hasn't heated since. Is there a way to reset it? everything else is working i e lights clock and rotaring tray OK, if everything, including the fan, is working, this will confirm ...

Control Panel "clock Buttom" dead Hi, yesterday after lighting and power restore, the microwave reboot and shows "please push the clock button, etc...", but seems my "clock button" is dead (BTW: I ...

when Start is pressed, the oven starts but within 2 to 3 seconds the clock flickers and the oven "seizes up". I have to throw the fuse breaker to restart the clock, use the light, etc. In all ...

...I would suggest is a hard reset. Unplug the unit for a minute or so. Then plug it back in, set the clock and try again. If that doesn't work, leave it unplugged for about 5 minutes. If it still

...located where the door closes... these switches all operate items such as the cooling fan,timer, clock assembly etc... sounds like one of these micr switches have failed and will require getting ...

microwave display says please press clock button, but nothing happens You have a failed membrane keypad. We'd be happy to help you with free assistance - including part numbers, part sources, and ...

I have a GE Spacemaker JVM1540SN1SS. It stopped working without any warning: no light or clock or anything. Just dead weight. Any ideas? It indicates the main fuse in the microwave oven has opened, ...

...panel not working, have unplugged it from the wall before and worked not this time can't set the clock only thing that works is the fan The control board probably failed and needs to be ...