...but i cant use the remote The timer light blinks when the AC power has been disconnected and the clock is not set. This is how the set warns you that it can no longer do timer recordings. Setting ...
Nothing works on it. It is lit up with no numbers showing just some broken horizontal lines where the time should be. Completely unresponsive. I have tried unplugging it to no avail. Please help. ...
...with unit and it says to turn off and back on does not come on cannot hear hard drive niose.has clock function turn on U99 appears. can you please assist This is the solution from the on line ...
...itself off after only running 2-3 seconds Tried a different outlet but that did not change problem. Clock is working. Shuts itself off in 2-3 seconds See if this describes what's happening: Put in ...
...3 seconds.After Microwave only runs for about 3 seconds then stops and the timer goes back to the clock mode.After several attempts then it will work.Problem is intermitten Chances are you have a ...
...press start, it works a few seconds then switches off. In those few seconds there is no heat. The clock and turntable are working as normal. See if this describes what's happening: Put in time,
can't set clock on microwave. Panasonic NN E273s The first thing I would try is a hard reset, which is just unplugging it for a couple of minutes, plugging it back in, and trying again. If it still ...
power but no display cancel works but cannot set clock The first thing I would suggest is a hard reset. Unplug the unit for a minute or so. Then plug it back in, set the clock and try again. If it ...
N275. The keypad stopped responding to prompts. I unplugged and plugged it back in and tried to set clock. It responded to pushing the clock key but when I set the time and tried to push the clock key
Usually answered in minutes!
