Questions & Answers for: Ford Ranger v clips

you unclip it. flat side of the bulb houseing sits at the bottom of the access hole. retaining wire clips bottom to top. I had a hard time with seating the new bulb and had to figure out the retaining

Ad

1996 ford ranger pickup-splash wiper motor replacement How do I access the crank arm nut or wiper arm clip without losing them inside the cavity? I tried the access openings and partially pulling the ...

Ad

Question about 1994 Ranger Supercab

1 Answer

Clutch slave hydraulic retainer clip not avail. I had the clutch line leading into the clutch slave on my ranger ripped out, got new line, cannot buy clip without slave. 1994 4.0L V6 Ford 5 speed. I ...

Question about 1993 Ranger SuperCab

1 Answer

clip holding brake hose to chassis im changing front brake hoses and i cant get the old hose off due to a weird clip that holds the hose to the chassis That clip is just rusted. Use a hammer and ...

...a hose clamp, or a 10mm if it is the bracket type. Some of the lines are held in with white plastic clips, others by special springs. If it is the type without clips, you'll need a special tool to ...

what is the Firing order for my 1988 Ford Ranger XLT 2.9L 1,4,2,5,3,6. clockwise. Standing in front of engine,Looking at front clip to hold cap on, 5,2,4 would be order from right of clip, back to ...

Question about 2003 Ranger Regular Cab

1 Answer

removing door panels on 2003 ford ranger 4 dr It's usually the window winder that presents the problem . Remove all visable retaining screws ie; Grab handle , Internal door opening lever , Button on ...

The wiper motor on my 1983 Ford Ranger still works but the wipers no longer move. I think there is a failure of the mechanical linkage. Where do I go to find repair parts? why do you think the motor ...

My power break booster is old and i need to take off the little clip that is holding the break pedal to the master cylinder how do i take that little clip off? Put a small screwdriver between the clip

Question about 1990 Ranger SuperCab

1 Answer

im looking for the fire order for an 88 ford pick up 6 cylinder Hello my name is brad,here is your answer to fireing order is 1-5-3-6-2-4. at the distributor cap the clip out away from engine right of

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...