Questions & Answers for: clip turntable

Removing turntable How do you take the turntable off of this product? pry the clip off of the center pin and lift

clip for the tonearm rest of a DP-1200? Parts for that turntable are nearly impossible to find. As far as I know, Pacific Parts is the only place that stocks these kind of parts. http://cgi.ebay.com/2

clip on the spindle that keeps the turntable on. But you will still not be able to remove the platter until you remove the unit from the cabinet. Remove the bottom cover and flip the two clips and the

...clip on the turntable...is that the vinyl black half moon clip on the middle of the turntable...i cannot get it off...help!! Why are you taking the c clip off? I pop them off with a small flat blade ...

...turntable of a aiwa pze860 it wont just lift up ? If the platter doesn't lift straight up, look for a retaining clip (a circlip) on the center spindle holding the platter down. If there is one, use a ...

...clip holding the turntable in place, but with small tools you should be able to get the clip free. Don't be too worried about getting the clip back on, as long as you aren't going to turn the unit ...

how to remove patter on dual 622 Most all Dual turntables have a clip on the post under the rubber mat. Remove the rubber mat and you should see the retainer clip. Remove the clip and pull the platter

c clip After replacing belt I lost c clip. Should I buy a new one or can I do without. I assuming you mean a horseshoe clip that holds something on. I would get another. They are not fitted for the ...

...turntable is typical of its type, first remove any clip which may hold the platter to the spindle (f there is no clip, ignore this step. Using the finger holes in the platter, lift upon it. While ...

...remove the c clip from the center post on turntable, help Using a small screwdriver insert it into the small gap in the middle of the "c" clip - twist the screw driver and the clip will be