...the factory radio did. If it's been installed with the original DIN mount, there are 2 small flat clips that slide in a small slot on each side of the radio. The 2 pieces of metal are pushed in to ...
Question about Talkabout FRS 250 (14 Channels) 2-Way Radio
i was just wondering if someone has any ideas on how to get it out. On the top-front of the radio, slip a small screw driver under the belt clip where it attaches and push toward the back of the radio
...remove the radio in my 1998 mountaineer you need specail radio removal tools. they spread 4 spring clips. Remove the radio chassis. Insert Radio Removing Tool into the radio face plate and release ...
...radio on Sansa Clip does not work FM radio on Sansa Clip does not play. No sound at all, not even static. Have you muted the radio by mistake.If you have there will be a square symbol under the FM ...
Question about Talkabout FRS 250 (14 Channels) 2-Way Radio
...screw driver gently into under the front of the belt clip, and then push it toward the back of the radio. They sometimes fit rather tight. Use care not to damage the radio or the clip. Best
...radio. (Push spring clip at the top away from the radio, then slide the belt clip up and off). 2. Remove the battery cover by pressing down on the top center and sliding the cover down and off the ...
Our company bought many Uniden GMR1235-2 radios, but the belt clips keep breaking and I can't find replacement belt clips. Can you help? The link shows a belt clip available from Uniden for 30 cents. ...
...clip where it attaches to the radio. Then gently pry the metal keeper toward the belt clip. The belt clip assembly complete with clip will slide upward and off the radio. Sometimes you will need to ...
...on until it locks in place. To install the belt clip, slide the clip down into the slot on the back of the radio until the belt clip lock clicks. Hope this helps! If you need more help, please
...if you clipped it. when you clip a radio you create a splash box that wipes out all channels lose by and the others will also be effected. the diode you want to clip is D-11. but I advise you not
Usually answered in minutes!
687 Questions
481 Questions
236 Questions
236 Questions
240 Questions