clean rollers. The alcohol evaporates completely off so that it does not leave residue behind. You will need to pull all the paper out and open the covers as much as possible without disassembling the
...clean the Paper Feed Rollers directly from the unit. Caution: Since the cleaning process wears down the paper feed roller, perform this procedure only when necessary and no more than three (3) times. ...
Question about PSC 1510 All-In-One InkJet Printer
...rollers and I think I cleaned what I think is the transfer roller at the back of the machine (sponge roller) and now all my copies are coming out with black lines. It has been 2 years since I had ...
Question about PIXMA MP190 All-In-One InkJet Printer
...clean the paper feed rollers. If the paper feed rollers become dirty, they may not be able to properly feed paper due to the feed roller's slippage. If paper does not feed correctly, perform the ...
clean the rollers at pressure roller and clean this off with spirits and soft cloth(rollers under the drum) empty out the master waste treay and clean off rollers here with spirits and cloth and check
...Clean all Rollers including one roller below the feeder. For cleaning Rollers you can take out ribbon and press the push button on front panel. This will move Rollers and you will be able to clean ...
...The coating also seems to have some wrinkles in many pictures. Is there a solution to this? Try cleaning the paint roller. 6 Care and maintenance Cleaning the paper feed roller To prevent
...rollers, I can feel it, but I can't get it out. I tried removing the screws on the back to open it up and get it out, but that did nothing. Any suggestions how to get this out or does anyone ...
...information I found on the Canon website, the paper feed rollers of your PIXMA iP1900 may need cleaning. Source: ...
Question about PIXMA MP460 All-In-One InkJet Printer
rollers up carefully to clean all the way around. Look for the paper pick roller farther inside the rear access area. The paper pick roller IMPORTANT : The paper pick roller is a bit more difficult to
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions