Questions & Answers for: Mazda how to clean well pipe Refrigerators

Ad

Question about 1992 626

1 Answer

...vacuum pipes for any splits, cracks or deterioration etc, also check that their connections are clean &

Ad

Question about 1996 Protege

2 Answers

...02 sensor circuit no activity detected sensor may be blinded by carbon build up, remove and try cleaning. might help, if not replace unit a bad 02 sensor on bank 1. this is the front sensor in ...

Ad

...a problem to remove the air intake pipe and look oat the throttle plate, if its dirty, clean it, with carburretor cleaning spray, that you can find in most fuel stations or parts shops. Hope this ...

Question about 2004 3

1 Answer

...system for when you turn the A/C on, called the IACV system. You need to remove the valve and clean the valve and passages with carb cleaner and pipe cleaning brushes, that will stop the

Question about 1992 MX-5

1 Answer

water coming in passenger side from air conditioner clean the drain pipe out for the AC unit

Question about 1996 Protege

1 Answer

pipe rusted and broke clean in half, but actual muffler is new. NEED TO TAKE VECHICLE TO MUFFLER SHOP LET THEM FIX RUST PIPE WITH A NEW PIPE.LET MUFFLER SHOP FIX BECAUSE THEY CAN WELD JOINT SEAL BOTH&

pipe should i replace these thing are clean them just do what appears to be logical and clean anything and everything and then see how it runs with oil filler cap off to make sure you have no internal

both: flush and filter. The filter and the pan hold the real contaminants, so those get changed and cleaned...but then you're left with a giant amount of fluids in the system. Torque converter, piping

...is loose, damaged, or needs replaced Catalytic converter needs replaced Mass air flow sensor needs cleaned or replaced The spark plug or spark plug wires need replaced. However, it is important to ...

Question about 1993 B-2600 Combination Switch

1 Answer

...attaches exhaust pipe to manifold? Usually it is a 3/8 stud and you should use a grade 8 nut. that way it will last, dont forget the gasket if it has one and be sure the area is clean from the old ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...