Questions & Answers for: Yamaha XT 660 R how to clean well pipe

...need to be set.I have a 2003 660 raptor and it was doing the same thing and that fixed it. clean jets in carb. i have an 03 660 and the reverse over ride was the problem and it did the exact ...

Ad

...there is gas coming out of the overflow tube. What can i do to fix thi. my dad said that i didnt clean the carb enough and that the float is sticking but i cleaned and soaked the carb You do have

Ad

i had a yosh pipe and had it jetted. i changed it i had a yosh pipe and had it jetted. i changed the pipe to a graydon proline and it back fires, does it need to be re-jetted? may do but try this 1st ...

...fuel stabilizer (it seems to help with old fuel and old suel deposits as well) and pulling air cleaner so that I could choke carb by hand and force a fuel draw. When she 1st fired up and I

...nothing Hi and welcome to FixYa, Other than checking that the battery terminals / connectors are clean & tight, check the main fuse. It would be located long the B+12 line from the battery's + ...

350 raptor only runs with full choke on , sometimes not at all than once its warm and u slowly turn off choke it spits, backfires then dies i took off plastic removed/cleaned gas tank and ...

...through the exhaust at a higher rpm? and within 5-10min the pipe turns cherry red. i have already cleaned the carb and a new plug. the previous owner jetted and added a full exhaust Either way too ...

...Regardless you are not going to like this answer.They will have to come off and be checked and cleaned again. I've done a set of carbs as many as three times to get them right so I feel your ...

Question about 2004 XT 660 R

1 Answer

...carburetor. It is also very hard to get out. You can try this before you pull the carb.s for a full cleaning.Use a produ ct called Seafoam, get as much gas out of the carb.s as you can. use a turkey ...

...Next problem. Check this first. Check the connections on the battery post, make sure they are clean and tight. Next the carburetor may have flooded and hydro locked the piston. Make sure the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...