Questions & Answers for: Yamaha V Star Custom how to clean well pipe

Question about 2006 V Star Custom

1 Answer

...float bowl needles / pipes could be plugged with varnish from dried fuel. You can try spraying carb cleaner into the fuel inlet to clear the varnish and then retest. Careful not to spray carb cleaner ...

Ad

Question about 2006 V Star Custom

1 Answer

...pipe cleaner in and sprayed it down. and sprayed some into the smaller one cause it looked like it had a small hole in the screw. I then removed the air cleaner and removed the diaphram cover and ...

Ad

Question about 2000 V Star Custom

2 Answers

Motorcycle running on one cylinder just obtained a Yamaha V Star 650. It seems to be running on one cylinder. What do I do? First, determine which cylinder is bad. Touch the exhaust pipes to determine

pipe was glowing inside and the other one wasn't. I though it was bad gas(water) should I open the carbs and clean the jets? What side of the carbs, I don't want parts flying out. Help I have no money

Question about 2002 V Star Custom

0 Answer

...If you are running multi carburetors you need to sync them first and make sure your air cleaner element is clean and dry. Here is how and where you compensate trouble: 1. Closed to 1/8 ...

Question about 1999 V Star Custom

1 Answer

I have a 1999 Yamaha v STar 650. It runs fine when its running. If it sits for a couple days it wont turn over for bout ten tries of starting it and then it starts up and gas comes out of both exhaust

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...