Questions & Answers for: Yamaha TZR 250 how to clean well pipe

Question about 1990 TZR 250

1 Answer

Fuel Problem Yamaha TZR250ma When the bike is left for a few days the Exhaust pipes fill up with petrol, any Ideas why? Thanks The gas petcock (valve) is letting gas get past it even when it is turned

Ad

Question about 1990 TZR 250

1 Answer

how much gearbox oil Hi, I have a 1998 gas gas ec250 and i am unsure of the amount of gear oil to put in it does have a sight glass on the side of the engine but i am unable to see anything through it

Ad

is there an olive between exhaust and head wear you bolt exhaust to cylinder head olive?? no there re no gaskets, jusr a cone seal on pipe over the cylinder head flange.

the moment the bike stands feul runs into the cranck case and then the fun starts... if it starts up, fuel sprays out the exhausts like a fire hose... is it because my fuel lines are in the wrong ...

Question about 1987 TZR 250

1 Answer

my tzr 125r revs get stuck Nice bike! My guess is the throttle cable is either dirty/worn or improperly routed. Also the slides in the carbs may need cleaning.

I need to clean the carb of my Yamaha TZR 50 The idle speed will drop down from 1400 to zero. After 30 seconds of idle running. I have this bike just a few days. And I am wonderering how I can remove ...

Question about 1990 TZR 250

0 Answer

Yamaha TZR 250 float specs How do you set the float levels on a tzr 250 and what is the feul pipe layout please Hi, Quintinvbs for this scenario you will need your service/owners manual if you can't ...

...pipe back to a carb to confirm this guess. If I'm right, you probably have a problem with the nedle valve in a carb sticking. I would suggest: Remove carb, remove float chamber, take the pin out ...

...an acceptable running condition and in the future pour in a bottle of fuel stabilizer and injector cleaner for you FI folks at least 2 times a year and before storage. 1. If your battery was 2-3 ...

Yamaha Tzr 250 3ma problem - will not run on righthand cyclinder. It appears to run at tickover engine speed, but fails to run at higher engine speeds. New plugs fitted - lots of white vapour from r/h

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...