Questions & Answers for: Mazda Millenia how to clean well pipe

Ad

will not start unless the car wants too.... this car is possessed. This car will not start until it wants to. I have checked the relays and the distributor cap and rotor and have found nothing wrong. ...

Ad

Question about 1997 Millenia

1 Answer

heater blows cold air,thermostat was changed, hose are good what could it be Could be a blocked heater core (the part inside the dash that the hot water runs thru), or the heater blend door motor not ...

Ad

Question about 1999 Millenia

1 Answer

...valve engines, without a cap you are throwing oil out of the engine and making a nasty mess to clean up. Let me know how it goes or if you need more info. ...

Question about 1999 Millenia

2 Answers

i need to know the location where is the engine knock sensor located on a 1999 mazda millium Hi, my 01 Mill. noc senser was on top of the motor, but under the intake! needless to say it cost alot... ...

How to remove and install a supercharger in a 96 mazda millenia I have found a used on and need to know how to remove and put back on car The supercharger is bolted to the engine and driven by the ...

Car has white smoke coming from tail pipe I have a 2002 Mazda Millenia. The car just recently started expelling whote smoke from the tail pipe at start up. Much more than normal condensation in the ...

...on a 1998 mazada milleara 2.5 YOU HAVE FUEL PIPES GOING TO FUEL DISTRIBUTOR YOU HAVE REMOVE AIR CLEANER ASSEMBLY YOU HAVE TO REMOVE LEFT AND RIGHT HAND CHARGE AIR COOLERS.REMOVE ACCELERATOR CABLE ...

...than one/ O2 sensor is after catalytic convertor and only one and most never goes bad, just needs cleaned. YOU HAVE TWO OXYGEN SENSORS.ONE OXYGEN SENSOR LOCATED ON THE EXHAUST MANIFOLD.THE OTHER ...

pipe should i replace these thing are clean them just do what appears to be logical and clean anything and everything and then see how it runs with oil filler cap off to make sure you have no internal

2002 mazda millenia p0305 riding rough flashing engine lights. New spark plugs , wires , distributer cap . the code you have is because you have a misfire on cylinder number 5 since you have already ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...