Questions & Answers for: Canon how to clean well pipe

...have replaced all black ink and have done the maintance for "Back of Paper is Smudged.Also did the Cleaning of rolers and other maitenance. But still get a 1/4 inch very heavy black ink on the ...

...and that going through the cleaning cycle, won't help. If this is the case, how do I clean the pipes? you have to open the printer and find the pipe which will be below the cartridge resting ...

...over come this error code Rich 253-752-4885 clean your waste toner pipe by using a vaccum you also haveto hit it to break up any hard toner build up replasce the bottle take machine off then on ...

...clean, but still no print. started with just black and now no color either? any suggestion? thanks, camilla Absolutely nothing is printing but printer is responding correctly to all commands. Have ...

...like to wash the tank sponz. Open case. There is a pad for waste ink that arsorb ink from head cleaning mechanic. You can just extend outlet pipe to outside of printer and use a bottle for waste ...

...use the syringe to blow air GENTLY through the hole the cartridge connects to. Make sure you have a cleaning cloth to remove ink dislodged from pipe connected at the print head, do this gently to ...

I have a code E000013-0002 west tone tank full remove it & clean it e0013-002 just you open the  west toner pipe and service..

...600 canon printer is printing black lines through some of the lines on the page. I have tried all cleaning and alignment instructions in the manual. Did not help. Do you have these black lines on ...

...door at the back of the printer. (in some printer it is in bellow) which is screwed. Unscrew it. There is a small pipe, which always filled with waste ink. clean it. start the printer, it will

...pipe is clogged with toner, remove the waste tonerdrive unit, and remove the toner. If otherwise, try turning the mainmotor clockwise by hand. If the screw rotates, wait and see whathappens; if the ...