Questions & Answers for: clean photoconductor

it clean. Am I to lay hands (i.e. rub it clean with a towel) or not? when i am printing a small dots black appear.. what is the problem? photoconductor unit? were can i buy one here in the philippines

...and/or its associated components. It is possible that: the photoconductor requires a bit of cleaning and to be reseated snugly; the black rubber conveyor (transfer) belt inside the ...

...resembles a fuse. I've tried short circuiting the contacts with foil and then wire. Hell, I've cleaned out the waste toner compartment. No success. I also see someone else posting about a "kill ...

...side with smaller streaks on the right side with some slight horizontal marks as well. I have fully cleaned the printer with compressed air and wiped down all that could be wiped down.The streaks ...

...is in the developer station.Check or changeb the developer,image photoconductor,photoconductor cleaning blade.Or make the AUTOMATICAL IMAGE DENSITY LEVEL

...clean white streaking. Hope that helps. Another thing that will happen in the future is your photoconductor will lock. You can replace the drum chip with a new one that will save you $$$ ...

...photoconductor was indeed dirty. I need detailed instruction on cleaning it. Cleaning the drum will not help. Depending on many factors including drum condition, number of pages printed etc, you will ...

...clean LSU on SCX 4725FN LSU is next to drum area. Remove the drum/toner/developer cartridges/assemblies as required. You will see the Laser Shield glass and opening near where the photoconductor drum ...

...clean the photoconductor and transfer belt. 4. clean the TR0 sensor in the printer 5. resolve any toner spillage inside the printer 6. reinstall the photoconductor,close all the covers and then power ...

...to have a good copy quality. before inserting or setting the photoconductors the machine is to be cleaned thoroughly. so let it be handled by a photocopy technician even you pay or not for its ...