Questions & Answers for: clean nozzle of pressure washer

...nozzle set to low pressure and still have the problem, it may be that the spray nozzle is partially blocked - you can try clearing it with a length of wire. Failing that, the non-return valve is ...

...moving through the tube. Used to work, but doesn't seem to anymore. Any thoughts?? Nozzle dirty, clean out nozzle with small diameter wire. Soap dispensing only happen at nozzle low pressure ...

...as though there is a vapor lock in the wand. the water supply is disconnected and there appears to be pressure is the washer hose. The wand is dirty!! Clean out the Nozzle with a small diameter

...nozzle/gun off and there still was'nt any water.Can somebody give me a solution or possible fix tips? If when you take the High Pressure water hose off the pressure washer pump no water will ...

...and will run water comes out of nozzle but when you pull trigger spray from nozzle does not change clean the pressure regulator valve in the pump Have you checked the hydraulic fluid level in

Karcher paatio cleaner attachment cleaning in suiggly lines When cleaning the paving with the patio cleaning hover attachment it is only cleaning part of the area in squiggly lines Squiggly lines are ...

...ar142 blue clean electric pressure washer....how do I adjust the spay? pressure washer nozzle article may help: ...

No amount of turning the nozzle is changing the width of the spray. Try taking the nozzle apart and cleaning. Could be a small particle in it

...pressure nozzle attached and then will only sort of dribble out the suds. Good for sudsing, but no good for cleaning. You'll have to suds 1st then change to a highwe pressure spray nozzle to perform ...

...nozzle cleaner, use it to clean the tip. If not, you can use a pin or paper clip to clear the nozzle tip of debris that may have become lodged in ...