Questions & Answers for: clean float

...float is stuck, take it down to floats and clean them out. do not leave bike on Res. after your done riding this will leave gas in the floats. I have had this happen many time untol i took it down to ...

Ad

...clean all those carbs) You probably have a stuck float needle or a float needle that missed the hole check the leaking carb again. It could be a piece of dirt on just the one float needle or worst ...

Ad

Question about 2500 PSI Gas Pressure Washer

1 Answer

...float needle seat area is clean. ALSO spray carb cleaner into the threaded area where the bowl nut attaches. Your cleaning off the metering jet orifice up inside the threaded area. INSPECT the float ...

Question about Super Recycler Super Bagger Lawn Mower Rear Bagger 5

1 Answer

...clean out. Float should be hanging freely and gas should be flowing, raise float gas should stop. Pinch off gas line or use shut off valve. Remove pin from float, remove float and needle meter. Use ...

Question about Super Recycler Super Bagger Lawn Mower Rear Bagger 5

1 Answer

...inserted thru passage way. Replace float and meter needle. Clean float bowl. Observe float bowl screw, look to see if it has a hole thru it, if so clean with wire. Reinstall float bowl. Try to

Question about Super Recycler Super Bagger Lawn Mower Rear Bagger 5

1 Answer

...or soaked with fuel. It won't float then. Replace the float, clean and/or replace the valve, clean the seat and check for scoring. New gasket on the float bowl, tighten it up, and you should be

Question about Power Lawn Mower

1 Answer

...float. Clean the float bowl. Ensure the float is working by pressing up on the float fuel flow stops, let it fall down, fuel flow. Observe the screw that you removed from the bowl, Look for to see if ...

Question about Power Lawn Mower

1 Answer

Clean float bowl. Observe bowl screw, see if there is a hole or holes thru the screw. Clean out with thin wire, bread wrapper works peeled back about an inch. Use wire to clean out center port of carb

Question about Power Lawn Mower

1 Answer

float up fuel stops. Use bread wrapper to clean center port of carb from bottom up thru carb body. Remove float pin float and meter needle, use bread wrapper to clean meter needle passage up thru carb

cheapy 4 wheeler is leaking gas bottom tube of carb.. took apart and cleaned float is working put back together still leaks??? the float is not what needs cleaning.. its the needle and seat that the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66847 Answers

Are you a Motorcycles Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...