Questions & Answers for: Kenmore clean fan on humidifier

...humidifier stopped collecting water completely. After I ran it recently, I noticed a few drops in the pan underneath the cooling coils but no water in the bucket. My observations are as follows. The ...

fan speed, but for me high is enough. I think this machine is made by Goldstar for Kenmore and Delonghi. Stuff is just made to break and through away these days, which is a shame. I found this to work

...not heat up, the heating element is internal to the unit, just make sure you clean it periodically and I would suggest having a fan asst to help move the humidification around the room, hope that ...

...the bucket remains dry even thought the unit is on. Also, it is getting very hot in the back. I cleaned the filter, but do not know what else to do Are the fan and the compressor both on? These ...

...fan months ago but it still worked. Now neither fans spins. How do I fix this? Do the motors feel warm-- maybe even HOT?-- Like they have electric current, but the bearings might be seizing up? You ...

humidifier is NOT adding moisture to the room it is running in? Can you give us some clues?-- Like-- How is the pad look inside? Are the fan(s) running? are there any indicator lights lit? Did it work

clean the fan on my 8 gal. kenmore humidifier, but regular screws are not used to attach the cover of the fan to the rest of the filter cover. An alan wrench is also not the right tool. Anyway, how to

...fan and compressor of my Kenmore humidifier turn on, but no water collects in the bucket even when it's on overnight. The control buttons don't work either. clean the condenser in the ...

...fan end shaft/bearing. 5. Use a Q-tip + alcohol to clean up the bottom bearing hole, then lubricate it with grease or motor oil. 6. Put the motor and bearings back together and make sure that the fan ...

...fan and other components. If you are experiencing issues with the motor, there are several possible causes and solutions: Check the power supply: Make sure the humidifier is properly plugged in and ...