Tray error I get an error saying to load paper even when the paper tray is full. Nothing seems to work. This only happens in tray 1, tray 2 is fine Since tray 2 works, I'd guess that each drawer has a
...with a Ricoh aficio 700 SC495 Empty waste Toner Container Clean Sensor but the code appears every 20-40 copies check the door contacts and the contacts on the transfer unit these need to be clean ...
Question about 2545DP Black and White Copier
...doesn't occur if the original is placed on the glass. We looked at the scanning window, and it is clean. The feeder mechanism looks normal. Laser cleaning paper did nothing. Has anyone seen this ...
density of toner on the Drum. Probably its dirty (on the worst case is broken). I advise you to clean it to see if it works. If doesn't work i advise to call your technical support (if you do not have
Question about 2545DP Black and White Copier
density sensor, it may be dirty or not able to read the drum surface correctly. If it hasn't been serviced in a while a preventive maintenance will be needed. What is the meter reading on the unit
We have an Savin Copier 816 which has an error message to load paper. There is paper in the tray. Hello! If you are sure that there is paper in the tray the problem is in the papaer sensor. It maybe ...
Question about 2545DP Black and White Copier
I have a Savin sgc 1506 copier. It has an error code sc 571. is this for fuser oil ? if so, How do i fix it? Ink head temperature sensor. replace the sensor
Question about Copier Supplies; Toner for 3515, 3515F, 3515MF, Black
My Savin 3515MF doesn't believe I replaced the toner. I have replaced it a few times, so I followed the same instructions as before but to no luck. HELP!! Please and thank you! Try cleaning any excess
Question about Copier Supplies; Toner for 3515, 3515F, 3515MF, Black
I cleaned the drum unit and cleaning blade on my SAVIN 8020d copier. After reinstalling everything i tried to print and it prints but nothing in on the page. Any suggestions? I cleaned the drum unit ...
...auger is clogged and won't turn. Also, the sensor on it could be dirty. Remove the assembly and clean it. It is behind the back panel - it is a small black assembly with a white hose attached to
Usually answered in minutes!
34 Questions
16 Questions
12 Questions
1 Questions
6 Questions