BULB AND LAMP I REPLACED THE BULB AND AFTER APPX 1 1/2 MOS I GOT A MESSGE TELLING ME TO REPLACE THE UV BULB & PLATE!!! WHY??? I can give you some possibilities. A loose connection, a broken or ...
clean the bulbs? Cleaning it is described in the product's documentation and in other Fixya solutions such as this one: http://www.fixya.com/support/t154553-ionic_pro_sizzles_crackles_when_turn As for
Question about Ignition Kit 2-8 HP Engines with Breaker Point Ignition #5012D
...retaing ring with the bulb. put the new bulb in then work the retaing ring in with a screw driver,clean everything behind the bulb before you put the new on in. You need a pick with a hook on the ...
... Any help would be greatly appreciated. Thanks. Ab it could be the bulb holder. remove the bulb and clean the connections when the bulb would fit some times they will need lifting back up, as bulb ...
...accepts the light from the bulb appears to have a haze on part of it. Does this area need to be cleaned before replacing the bulb? If you can clean it and it comes off I would do it. This haze is ...
BULBS. YOU NEED TO WEAR CLEAN LATEX GLOVES WHEN CHANGING HALOGEN BULBS BECAUSE OILS FROM FINGERS AND HANDS WILL CAUSE THE HALOGEN HEADLIGHT BULBS TO OVER HEAT AND BLOW OUT. HALOGEN BULBS ARE EXPENSIVE
...bulbs.WARNING YOU NEED TO WEAR CLEAN GLOVE TO REPLACE HEADLIGHT BULBS BECAUSE THEY ARE HALOGEN BULBS. IF YOU TOUCH HALOGEN BULBS WITH BARE HANDS. OILS FROM SKIN WILL CAUSE HALOGEN BULBS TO OVERHEAT ...
toshiba rear projection needs cleaned the screen looks like it needs cleaned ive done that plus took the bulb out and cleaned it and the small mirror but the screen still looks smeared. I take it that
Question about 2003 Alero
...not get as bright as the other head light ,and the bulb is good The headlamp bulb cover lens is clean? Try swapping the headlamp bulb from one side to the other, if the problem follows the bulb, ...
Question about 2003 Alero
...the bulbs go in need cleaned. If you clean it just remove the whole holder just by squeezing the connector that hooks into the holder. This is a common issue. But more then likely it just the
Usually answered in minutes!
271 Questions
141 Questions
164 Questions
134 Questions
