On booting, an orange error flashes, continues to boot, and then beeps 3 times. Will not print. Try cleaning off the contacts on the ink carriage with a cotton swab dipped in rubbing alcohol. The part
...boot rom and clean the contacts with rubbing alcohol. After you turn the copier Off and then back On after you reinstall the boot rom. You can also try to do a HD chk in service mode. You will most ...
Question about PIXMA iP4600 Color InkJet Photo Printer
boot up with your printer turned off, the thing is that with my previous printer ( an Epson) I left it on all the time and never had this issue when I booted up my PC. So I'm asking, what gives? Could
Question about imageRUNNER 8500 Copier
please... Did you clean the contact of the boot rom? Are you sure you have the right boot rom? Why did you replace the boot rom? Good Luck.. My canon IR 8500, when I touch LCD some places doesn't work
...completely. The LCD shows the ''Waiting'' screen with the progress bar but will not finish booting and will not show an error code. Already replaced the hard drive. try to clean or replace the boot ...
Canon PowerShot A470 Digital Camera there is problem during picture taking process.pictures are not clean and many lines appear in photos Try taking it into a photographic shop (or just Boots) and ask
ir 7200 tripes down after 10 min. with display off only light indicater works clean the boot ram & mfc bord
no display clean the boot ram it is in sid the main bord
Question about iR 1600 Copier
...canon IR 1600 control pad is not displaying after showing after removing a pram,but its warming up well. canon ir 1600 copier lsm 11297 number Clean the contact of the boot rom. Then re-seat the
Question about iR 1600 Copier
booting ram and clean but same appearance. Dear Pl. check the DDR SDRAM,BOOT ROM clean the contact surface with a dust free eraser,check HDD and its slot on MAIN CON PCB. If possible reload OS. Thanks
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions