...clanking or a pinging, almost like the starter gear is grinding or somethen againts the flywheel, or maybe the torque converter is loose, i dont know. it does start and run though. also i did a ...
...clanking noise on front left tire My 2004 F-150 2WD is making a clanking noise on the front end. The front left wheel sounds like it's loose sometimes. Sometimes the breaks grind - but the pads are ...
clanking on turns reduces the possibility of the U-joints being the culprit. The driveshaft would give you noise going from reverse to drive, but in turns it is likely the clutches in the rear axle. A
Placing the automatic transmission into drive or reverse a "clank" noise is present. Also, driving i hear whining noise. U-joints appear in good shape. Is replacing the differential gears, etc... ...
clanking noise from the back of the pickup. Also will all of a sudden thump one time when it is driving ok. It was bad last night on the way to town and in town and then on the way home was fine. This
...clanking sound. He says the way Ford designed the driveshaft that it would need to be taken out and sent out to be rebuilt and then reinstalled. Does this sound right to you guys? Also not cheap to ...
...clanking noise when driving what could it be Where is the noise coming.If its from the engine it may be one of your lifters are loose and need to be adjusted. If it is when you turn it may be a ball ...
...clanking noise or both (h) could also be wheel bearings or the hub which ever you have ///when stopping do you hear a rumbling noise from either side or when turning these are all possible what kind ...
Usually answered in minutes!
2,636 Questions
1,214 Questions
1,298 Questions
1,160 Questions
1,038 Questions