Questions & Answers for: GMC clanking noise

Clanking like sound in the front end that sounds like either the drive shaft or the gears in the transfer case? Hard to hear unless pulling in the garage where the sound bonces off the walls. The ...

shifting from park todrive makes loud clanking noise,and on highway when you let off the gas the truck starts vibrating Sounds like a Universal Joint going bad.

...clanking noise ,sounds like it is in the rear drive line,is not shocks or U-Joints where do I look next. jack the truck up and spin the wheels one at a time... forward then back... to see if it is in ...

...broke or came loose and it stopped pulling now when i put it in gear it is making a clanking noise and just sits there like its in nuetral Iam afraid it will have to come out and come apart Hope ...

...clanking noise from the bottom of the truck. I changed the plugs, Fuel pressure regulator, and air filter. Coils are good. is the clanking noise connecting rod bearings,crank bearings,piston noise.is ...

there is a clanking noise in the rearend when put in gear, it is not universal joint ring & pinion or spider gears in rear end

...clanking noise from the front driver side driveshaft i went to a mechanic and he said to put it in four wheel drive which i havent done in 2 years the noise went away then started up again 45 miles ...

...clanking noise.i was told it could be flex plate/fly wheel the truck is a1999 Yukon with 200k This is possible with engine off through a round inspection hole on transmission bell housing you can see ...

...clanking while in reverse is it the struts or the u joint?? struts make a noise on bumps and rough roads. I would be looking at the "U" joints as they may be ready to fall apart. It was the parking ...

What can cause a clanking noise when i go to reverse or drive i changed both u joints on the drive shaft Bad engine mount? Worn rear end gears? Loose torque converter bolts?