Questions & Answers for: LG circuit board

...circuit board died machine wasnt draining water, leaking all over my floor. then the door wouldnt open, forced it open. cleaned out the drains/filter connected everything went to use the machine "DE" ...

...circuit board.I'm assuming it is a main panel circuit or the circuit/panel board in front. What would I need to test to see if the main panel/circuit board is faulty? I had assumed that the front ...

...circuit board normally found attached to the dvd drive. also known as the mpeg printed circuit board. the majority of my experience has led me to replace either that printed circuit board or even to ...

...circuit board located inside. Look for any scorched / bulging / leaking electrolytic capacitors on that circuit board. If you see any evidence of this, then you might want to consider replacing the ...

...circuit board for backlight inverter/LED driver. I think these might be part of the main or power supply board. I have done what they call the flashlight test and i do not have backlights but i can ...

...circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the ...

...circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the ...

...circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the ...

...circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the ...

...board, especially the high voltage circuit. The volts at the capacitor should be around 390 to 400 volts. Today's TVs has a chip that check all the circuits and if one of circuits is not working, the ...