Questions & Answers for: choke linkage

choke linkage is sticking .first take your breather off so you can see the choke linkage look to see where the plate is positioned is it fully closed have somone try starting with out touching the gas

Ad

Question about 1999 Rodeo

2 Answers

...linkage from the choke knob to the carbeurator is likely disconnected, check the linkage at the carb and follow it back from there to find where it came apart. get a repair manual to see if ur ...

Ad

...linkage where the choke cable goes through the clamp with the screw. Loosen the screw that grips the choke cable. Make sure the the cable is all the way in and that the linkage is in the position to ...

Question about 1979 XLS 1000

1 Answer

...1 more turn each and choke in make sure you have very thin oil in pistons, then when running adjust jets 1flat at a time when it runs smooth lock up the linkage and adjust screws till idle at 600

Question about 1984 Ranger

1 Answer

...the heater to see if it has voltage and if it is working. The linkage for the choke can get sticky or dirty and not work. Basic gravity and a spring opens the choke so the linkage must move

...linkage, especially on the choke side with penetrating oil and work it all back and forth.Make sure you engage and disengage the choke linkages manually through all its functions. Then spray it all ...

linkage and which is choke linkage? The choke linkage moves back and forth left to right. The throttle linkage is in the center of the carbs and pulls a pulley that turns the throttle butterfly plates

...choke linkage is not properly hooked up or adjusted. The throttle linkage is not adjusted properly or there isn't enough vacuum. The choke linkage has a tab that prevents the 4 barrels from opening ...

...linkage for choke and throttle I need to know exactly how the linkages and the spring connects to the carb so I can reinstall them. I need a diagram, schematic or photo of the carb showing the ...

...3 cyl 2 stroke and the choke comes on when i accelerate and cuts back to idle Take off the motor cover and check the linkage to ensure the throttle return spring is not hung up on the choke

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...