...choke assembly is out of adjustment or not functioning correctly. On a cold day, you will note that the choke assembly is closed, try manually opening it and proping it open to see if this improves ...
...a small bit Could be the choke spring has deteriorated with age hence the choke assembly will need to be replaced. You could also install an aftermarket choke cable to operate it manually. Good ...
...choke" cable. Be careful when tightening the nut on the backside of the cable knob end. The assembly is made of plastic and breaks easily. To adjust the tension on the cable. turn the knurled ring ...
Question about 2004 FXSTD - FXSTDI Softail Deuce
...choke spring assembly. The thermal spring assembly is held in place by the muffler. there should be some spring tension of this unit is moved it should push the choke closed when the engine is cold ...
...it out it just goes back in you need to buy a new choke assembly . i had the same problem on my cr85 i would always have to hold it up when starting. not a big deal but it is just the choke ...
...choke assembly but can not get to it to change broke lever. How doe hood cover come off which covers muffler, spark plug and choke. Can not get my fingers in to unscrew screw. pp208e24 Google ...
Question about 2011 RMZ250
...choke assembly from the handle of the choke on the mower body i have disconnected it from the throttle model # 917.289472 The Choke handle/knob is fastened to the dash of a riding mower either with a ...
Question about 2011 RMZ250
...leave to soak. Or may be removed and possibly(carefully) dis-assembled and cleaned out. Same for the choke lever assembly. Or the notch meant to hold it out may be worn and need filing a bit
Question about 2011 RMZ250
way to convert to manual Disconnect the auto choke assembly and hook up some sort of mechanism to manually open and/or close the choke. Spring load the choke so that the default position is fully open
Question about 2011 RMZ250
...choke spring assembly. The thermal spring assembly is held in place by the muffler. there should be some spring tension of this unit is moved it should push the choke closed when the engine is cold ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
