Questions & Answers for: chevrolet tracker master cylinder

...Chevrolet Tracker Steering Issues I recently replaced my serpentine belt and idler pully. But I still find it very difficult to turn my steering wheel while turning corners. Could this be my power ...

Ad

...tracker 78k miles rear drivers side leaks a fliud and makes a light scrubbing noise brakes and drums were replaced it may have something to do with 4wheel drive axle i was told has anyone had this ...

Ad

...tracker 2.0 liter motor, no abs Did you bleed the master cylinder before you put it in the vehicle?This usually makes it easier to bleed the entire brake system if this is done before you install the ...

...master cylinder needs to be bled...You can purchase a bleeding kit at any auto-parts store...It's very inexpensive, about $5...Two plastic tubes are connected to the brake lines(front reservoir & ...

...tracker 4 cyl 2 wd I've been having problems with the front brakes locking up when driving. It happens at different times and different driving conditions. Sometimes pumping the pedal breaks them ...

Question about 1998 Tracker

1 Answer

clutch goes to the floor I would check to see if there is a master cylinder on the clutch or it possibly could be a broken cable or a worn pressure plate.

master cylinder but it still seems like the brake pedal goes further t I have a 2002 Chevy Tracker....It has 113 000 k on it. I was driving one day and the brake pedal went straight to the floor, when

...master cylinder but the problem is still there?? I had my brake pedal go to the fllor, Brought it into a garage....They inspected the brakes, told me there was no leaks and they figured it was the ...

Question about 2001 Tracker

1 Answer

2007 dodge dakota,replaced calipers,pads,rotors,rear wheel cylinders,shoes,lines and 2 master cylinders.bench bled mc and bled all wheels several times but cant get pedal to stay up.is it possible i ...

...stop sign my brake foot goes down to the floor board Your master cylinder could be low or your parking brake is slighty applied or not releasing all the way if your using it due to a cable hanging ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...