Questions & Answers for: check timing 125 yamaha

Coolant light coming on some times when off road 2004 DT 125 RE MODEL check the coolant level, or the wire going to the bottle

...125 rear brake master cylinder with new cylinder kits from Yamaha. WHEN I tried to bleed the system. It seem do not built up the pressure. I suspected the cylinder check valve may be defected. Or do ...

...125. At times it acts like it isn't taking gas and five minutes laterit is running fine. Sometimes it will even stall out on me. 3 things, carb check float bowl check and clutch check. these, if not ...

...125 wont work First. Check the brake fluid level. Second. Look for leaks in the lines and calipers. Third. Check the brake pads. Fourth. If pads worn, pull and replace Fifth. If pads are okay and all ...

...125 2007 model. I would like to know how do i check if the oil pump has the right setting. If you ride slowly for some time and then when you open up there is a huge smoke screen behind you for some ...

...yamaha xt 125 r and every time i am flat out it dies i have a yamaha xt 125 r and every time i am flat out the revs die the throttle goes and it just stals can anyone help me please iv checked the ...

...check your transmission fluid on a yamaha 2003 125? On a MX race bike like that you really don't check them just replace the oil regularly - every 2-3 hours ride time would be OK but if you can ...

...timing. Also get the electrical and CDI unit checked. If the spark plug is old then change that too even if its working. If you want to check the plug for its fitness then you can do it like the way ...

...check for spark leakage in the dark, cable connections loose, or connected to the wrong cylinders. 16. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, ...

check for leakage in the dark, cable connections loose, or connected to the wrong cylinders. 13. Ignition timing incorrect due to a faulty MAP, CKP, O2, TPS, sensors. 14. Faulty neutral, clutch lever,