Questions & Answers for: Ford Focus check timing

...a false economy saving. If you are positive that the timing belt is correctly installed then I would check cylinder compression and I would make sure it is getting spark. It never hurts to check ya ...

Ad

...timing such as the belt and the camshaft, check and make sure you getting fire from spark plugs, having a friend turn the engine over and you observing the plug. by pulling one wire with the plug and ...

Ad

...Your description is that of a timing issue. Either your distributor is off or your timing belt has slipped... Time to have the timing check/adjusted/corrected. Cannot be another issue...that I know ...

...timing belt pulley. Check the alignment of the timing mark on the camshaft timing belt pulley. Install the timing belt. Install the timing belt over the pulleys in a counter clockwise direction ...

Question about 2000 Focus

1 Answer

no back lights or brake lights bulbs and fuses ll ok check fuses first, then check all the lights, if one is out its possible to mess up the rest, also inspect light sockes, they do short out from ...

...it consist of a pump linked to the pedal and a receptor most times inside the transmission, check the pump first it has to build good pressure when press the pedal you need help to check

Question about 2000 Focus

2 Answers

...check valve timing. If the timing belt has sliiped a couple of teeth, you could get this behavior. Usually, though, the engine would cough and backfire when the timing slips. To check valve timing, ...

Question about 2000 Focus

3 Answers

...timing belt? Hi. First thing to check is the cooling system itself. Check if fans are coming on. If there is no fan coming on, then there may be a defective thermostat. Check the water pressure. The ...

Question about 2000 Focus

1 Answer

...check the timing on a ford focus 2001 2.0 Zetec YOU DON'T CHECK TIMING, IT IS CONTROLLED BY COMPUTER, I AM ASSUMING IGNITION TIMING, IF ASKING BOUT MECHANICAL TIMING (TIMING BELT) THEN SIMPLY DO A ...

...timing belt is an extremely difficult task. If its not lined up correctly engine failure will result. Could also be a vacuum leak. Check all vacuum lines paying particular attention to vacuum lines ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Focus
2000 Ford Focus

3,749 Questions

2001 Ford Focus
2001 Ford Focus

2,612 Questions

2003 Ford Focus
2003 Ford Focus

2,055 Questions

2005 Ford Focus
2005 Ford Focus

1,226 Questions

2004 Ford Focus
2004 Ford Focus

897 Questions

Manuals & User Guides

Loading...