...speakers, to see if the positive cable is connected, or the negative, from that you also check the wire connector end, if is in good condition too. hi there... i would like suggest u to check u r ...
...speakers ????? first findout the problem is due to speaker or from your computer soun driver or hardware. for checking speaker, connect to an ipod or walkman to the speaker input if it works the ...
...computer settings arnt muting your speakers Check to see to if the audio driver software isn't muting the speakers as well FIRST CHECK WHETHER THE SPEAKERS ARE PLUGGED IN AND CONNECTED TO THE ...
Question about (90.18612.36B) Computer Speakers
speakers for my computer? 1 step: kindly check the connection of the left speaker if it is plugged to the right speaker properly. 2 step: Then check the balance under volume control if it has been set
...Check your power input to the speakers, very common to become unplugged from the wall outlet. (however some speakers do not have external power source) verify , mute is not checked off. (speaker icon ...
Left speaker sound is distorted can Ireplace one speaker Yes, you can check left speaker by replacing it or by interchanging with the rightside speaker. If the speaker is okay, then check for faulty ...
1 set of speaker jacks not working, grounding out? Try to checked the connection of the speaker if it is connected properly from the circuit board(amplifier) if not tightening it. To checked if the ...
Check speakers - Connect each Surround speaker to RXV's Centre out. If it works Speakers are ok. 3) Check RXV - Set it on DTS or Dolby Digital Connect RXV's surround out (one at a time) L and R to the
Question about RX-V463 Receiver
check speakers". I checked all the connections and the banana clips all seemed tight. What now Check the wires to the speakers for continuity. The amp isn't seeing the correct speaker load so it warns
Question about RX-V463 Receiver
...speakers are not working. Check the output settings: The Kenwood KR-V8010 has a few output settings that can affect the sound output. Make sure that the settings for the B speakers are not muted or ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions