...check the used hours of the lamp? I cannot seem to find how I can check the used hours of the lamp of my Optoma EP737. press buttons up-up-left to go into service mode, there you see the lamp hours, ...
lamp usage. the projector works for around 60 mins. then the lamp flickers and lamp fails. after power reset it work again for another 20 min. and so on. If i switch off the bright mode the same thing
Question about MovieTime DV10 Multimedia Projector
un-usable. Any hep would be greatly appreciated. Regards, Binh Hi bkdao Did you reset the lamp timer ? Check if all the fans are in working condition and also check if your colourwheel is in one piece
Question about EP737 - DLP PROJECTOR - 1500 LUMENS *NIC* Multimedia Projector
how can you tell how much lamp usage is left go into the menu settings and look for lamp timer. should give you # or % of hours left.
... Lamps have an expected lifetime and the message indicates that the lamp is nearing that lifetime. Once reset, the counter will again trigger the message once this new lamp reaches that usage time. ...
Question about EP719 XGA DLP PROJECTOR 2000L 2500:1 CONT DVI-D WITH HDCP Multimedia Projector
...I took the lamp away and now the projector doesnt power up with lamp or without. Help please!! Please check the Lamp cover .posibilty not fitted properly Mahesh M.R.Corporation ...
...optoma hd-81 there is a lamp unit housing.It goes faulty the lamp unit housing .There is no ballast in the hd-81 projector.There is lens ,the lamp unit housing and the circuit board.In most of the ...
lamp comes on briefly and then goes out Check poewer connection Check if fan filder is dirty ( if it is just hoover it out) If "lamp" light on top of the projector blinks or stays lit - lamp probably ...
Question about MovieTime DV10 Multimedia Projector
... same result optoma movietime dv10 please Check Lamp Cover and Interrupt Switch - Ensure that all connectors are securely connected and aren't broken - Check LVPS - Check Lamp Driver - Check Main ...
Question about MovieTime DV10 Multimedia Projector
...Check the lamp to see if it needs to be replaced. If the lamp is burnt out, it will need to be replaced. Make sure that the lamp is properly installed and securely connected. Check the temperature ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions