Questions & Answers for: Chevrolet 1500 check gauge

Question about 1988 K1500

1 Answer

...fine,battery gauge reads 10 ? when ready to jumper cabels gauge reads 14? but nothing not even turning over? cheaack the fues link good? check the ignition coil for liq of white stuff on wall of

Ad

...gauge fuse. sounds like a mouse has got in and chewed the cables,their is no easy fix from what i can think of but check all the wires and connections in case water has got into it,or snow if your in ...

Ad

Question about 1995 K1500

1 Answer

...check gauges light comes on and my oil pressure gauge drops to 0 then 5 to 10 sec later it works fine. there was one time that it stayed at 0 for a couple mins. can anyone help me out with this one ...

HOW DO i FIX THE FUEL GAUGE/ALWAYS PINNED ON FULL sounds like it is grounding out. Check wires' for the gauge and for the pump

When i turn on my headlights the temp gauge goes to hot the other gauges flicker with signal. What causes this? check your battery and alternator. does the rpms drop when you turn on the headlights?

oil pressure gauge stopped working on my 1988 gmc sierra check to see if your oil sending unit has come unplugged or the sensor itself could be pluged or the gauge is defective.

Question about 1995 K1500

3 Answers

Check gauge light is on When the check gauge light is on my RPM,speed odometer and gear light dont work. transmission dont shift right.Could it be the porportion valve,trans module,or computer and the

...gauge is not registering and my check gauges light comes on when im at a stoplight.when im driving the oil pressure is fine but when i come to a stop or idle the check gauges light blinks on and off ...

Question about 1995 K1500

1 Answer

...check your gauge is ok, disconnect the water temp sender wire and the gauge should either go to hard hot or cold. If neither happens your gauge is faulty. Let me know how you get on. Also check your ...

...type then you could have a oil pressure problem ,or a faulty gauge . Also check the oil type/ you should be running about 30W 40 or 50. But the sender unit if electric will be screwed into the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...