Questions & Answers for: check gauge Vehicle Parts & Accessories

check gauges light comes on but gauges are all mycheck gauges light comes on but gauges are all fine that could be anything from low coolant to low washer fluid or brake fluid check all your fluids if

Ad

Question about 2001 Durango

1 Answer

the temp gauge is to high, is the vehicle overheating, is the check eng. light on, make sure all the gauges are reading normal, the check gauges light is there to get your attention, see what it wants

Ad

Question about 2001 Durango

1 Answer

...check the gauge fuse, if the rest of your gauges are working this usually means the fuse for all gauges including temp, oil, fuel are ok. Next you'll have to locate the sending unit wires at the fuel ...

Question about 2003 Grand Cherokee

1 Answer

...CHECK GAUGES! One or more of your gauges is/are reading outside of normal operating range. You could be having an overheating problem (Temperature gauge near or in the red) You could be having a ...

check gauges signal , temp gauge stop work, when I acelerate everything goes normal again this mornin when I start my truck check gauges appear in the dash and temp gauge go down,but ,when I acelerate

Question about 2000 Lancer

1 Answer

...check the fuse box. One under hood and other under dash. Inspect each and every fuse and see if all are fine or not. --------------- For more troubleshooting on these cluster gauges I suggest you to ...

Check gauges light on all the time. I replaced radiator cap and topped up coolant . Also checked and topped up engine oil, power steering fluid, brake fluid . All gauges show normal reading but the ...

Question about 2001 FXDWG Dyna Wide Glide

1 Answer

...check the fuel gauge and sender unit? Which fuse is it? Does it run thought the gauges fuse? Check for 12 volts at the orange wire on the fuel gauge. If missing check instrument fuse and associated ...

Question about 2001 FXDWG Dyna Wide Glide

2 Answers

...check for voltage on the fuel gauge wire with key in ON. If there is power, the wire is bad somewhere between there and the tank. If no power either gauge is bad or the gauge is not getting the small ...

...going to the tank, try to bridge them and see if there is response from the gauge. If the gauge responds, then the problem is in the tank. Replace the gauge in the tank. Hi! Maybe check the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...