Questions & Answers for: check engine light 2004 taurus

...check engine light is not on. I looked under the hood and the sound seems to be coming from the serpentine belt. The noise does seem to disapate when I accelerate, it is most loud at an idle. Any ...

...check engine light is on. I took it for a tune up and they replaced the gasket to the manifold but it did not correct the problem. What else could it be? PLEASE HELP! check the EGR valve and all the ...

...injector cleaner through it. first thing you have to do is go to auto zone or advance auto parts and find out why your check engine light is on they do this for free then you will know where to

...check engine light came on. The f... My 2004 Taurus' check engine light came on. The first scan gave the error of PO606. Is this serious? Thank you. p0606 refers to the computer (pcm). unfortunately ...

...engine malfunction light will come on if there is a fault with the emissions if it runs ok and isn't misfiring it's probably a oxygen sensor fault or a catalyst fault. The light won't go out unless ...

...CHECK ENGINE LIGHT WILL STAY ON.UNTIL YOU FIX PROBLEM. You can try disconnecting the battery for 30 minutes but more than likely this will not work. In almost all cases on OBD2 compliant vehicles you ...

...timeswhen driving the check engine light starts to blink and engine loses power almost stopping what can this be you will have to go over all the steps again, my guess is you missed a ground ...

for 100 miles for the system to reset. The check engine light went off, but I'm still showin 6 cylinder DOHC Taurus SES What does it say for that code? What sensor was replaced? Still showing what

check engine light came on. Car seems to heat up ever since replaced AC. What could be the problem? My 2004 Ford Taurus had a shot AC Compressor and i replaced it and now, ever since i got it replaced

...engine light is on in a ford taurus 2004 and when u turn on the car you hear a knocking sound could that be a broke spark plug No --it will be something else. Run the fault codes to determine why the ...