Questions & Answers for: Peugeot check cable

Question about 1991 405

2 Answers

Front wheel Drive query I have just bought a 1992 GRTD manual. I had the car up on stands checking out an oil leak. I had the car idling with the right front wheel off the ground and it started moving

Ad

Question about 2005 405

1 Answer

...check this one anchors the cable outer and the inner cable moves the clutch fork the other the inner cable is anchored and the outer sheath moves the clutch fork also while you have it all off change ...

Ad

Question about 2005 405

1 Answer

...check the terminal ends of the battery cables. One (+) is likely connected to a starter terminal, the other (-) either to the engine block or chassis sheet metal. The latter cable may be fastened to ...

...cable on peugeot 405 1.9 diesel (1996) there is a little plastic link between the end of the cable and the clutch pedal which can snap check it is not this before attempting to replace the

...check the cable at this point and possibly cable's plastic bush restrainer is slipped out of half-cut circle-holder. You must push/fit in correctly the cable round bush holder in the half-circled cut ...

...Check the cable inner for broken strands. As the clutch is not breaking enough to allow you to select gears quietly, and as is slipping in the higher gears, I would say it could be worn out too and ...

...and it seems to be fine, the cable retaining clip is operating fine? Any suggestions? Is it an expensive fix? Check that the throttle return spring is in tact. If not connected or broken, replace

Question about 2005 307 1.6

3 Answers

...is showing positive from the ports. Check the power connections of your devices, check that all the cable connections are secure or not. The resetting of cable connection will take only 15

Check your battery cables for corrosion. Corrosion can sometimes be mostly hidden up in the insulation of your battery cable. If there is no corrosion present a bad battery is the most likely culprit.

Question about 2005 405

0 Answer

...cable connections loose check for spark leakage in the dark. 6. Faulty ignition coil or electronic control module. 7. Faulty pulse coil. 8. Faulty CKP, CMP, or BAS sensor. 9. Faulty ignition switch. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1991 Peugeot 405
1991 Peugeot 405

451 Questions

1990 Peugeot 405
1990 Peugeot 405

103 Questions

1999 Peugeot 406
1999 Peugeot 406

80 Questions

1999 Peugeot 206
1999 Peugeot 206

56 Questions

Top Peugeot Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...