Questions & Answers for: Ford Ranger cheap pump

...cheap enough too. Start with examining the spark plug wires, cap, rotor, spark plugs. Spark plug could be loose, wires could be arcing or buildup on rotor/cap. My truck has over 200,000 miles and is ...

...cheap and nasty fuse boxes and Ford wanted double the price of the original for a replacement. You mentioned you thought it was something overheating and cutting out, I agree, I also noticed you ...

...pump. what do you think? the fuel filter is on the inside of the frame rail on the drivers side (about the size of a coke can), u will need a special tool to release the fuel line clips, these are ...

...pump shaft only once in a while and eventually not at all. Fairly cheap fix compared to a new motor which is what youll end up having to buy if you sont fix it. Took me a while to figure out what it ...

...polishing 3. rod end bearing replacement and possibly resizing The oil pump is the least of your problems. Just being honest so you can understand what could be instore for you. Sadly it is not

need to no y wiper sprayer not working but wipers work bad or clogged pump or hose..do you hear the pump when turning it on?,,if so clogged line if not..bad pump..they are rather cheap at a parts ...

...pump connectors at bolth ends see if that solves it then clean and seal the connectors if its the problem . Its a vary solid vehicle and dependable easy and cheap to repair and buy parts for I like ...

...pump, you have only a few cheap fixes before blaming the expensive fuel pump.  The fuel pump relay can overheat and kick out.  A new relay could fix this.  Autozone.com offers free ...

...pump itself or the crankshaft sensor hooking up a scanner may give you some ideas Friend, I've come across this situation many times and what happens is when the engine is in cold start mode, the ...

...pump and thermostat replacement done this morning. Mechanic suspects a secondary leak in the lower intake manifold. Suggest gasket replacement. Should I do this now or should I wait and see? Hi ...