Questions & Answers for: channels skip around channel button

...channels. Now, the red Aux. button lights up on my tv remote when I push most any button, I can't turn my tv on or off with the remote, and the picture flips around so bad I can't watch it, sometimes ...

...scroll up all the channels and stop in a minute and store them all in memory. The words may be slightly different on your tv, but the procedure will work. Play around in the menus. You will find

...channels or unchecking the skip option on my Element FLX32FHDH tv. Is there a way where I can set this and not have to keep resetting it? My Element FLX32FHDH seems to lose it's channel list if it is ...

skip all channels. After several times the set should remember your channels. WA#2 = after a channel scan, go to the skip channel section of the menu, and if your remote has the colored buttons on the

Channels. If that doesn't work you can pick up a Universal Remote from Wal-mart or Best Buy or any store around that sells electronics for the most part. They range anywhere from $10-$35, at least you

...around this problem if I could just get the TV to change to channel 4 using the buttons on the TV itself (they still work). If it is on channel 4 I can get the VCR or my converter box remotes to ...

...around "OK") 4. Press "OK" to enter the SETUP MENU 5. Use the DOWN arrow key to highlight "PROGRAM CHANNEL" 6. Press "OK" to enter the PROGRAM CHANNEL MENU 7. Use the LEFT/RIGHT arrow key to ensure ...

skip scanning for channels. This fixed my problem with the blue light. The store uses SHOP so if someone plays around and changes something, all they have to do is shut off the TV and turn it back on.

channels. Shows & allows setup of recording schedule, and if there are conflicts between SERIES RECORD & recordings, to set Priority. Scheduled Recordings from EPG: Settings for recording Once

around sporadically I had same issue and it turned out that the actual channel down button on the side of the TV itself was stuck. Popped it out with a knife (IKR) and that fixed the issue. Works fine