Questions & Answers for: Vizio channel run

no audio on some hd channes I just purchased a new vizio 42" lcd tv and i plugged it in scanned for channels it gave me some i dint have before with my analog tv including hdnet and hdmlb which is ...

Run a channel scan on the DTV and/or TV input depending on what one your not getting channels on. This will solve your issue. Change the input on the unit to the DTV or TV input. Press the menu button

...run a channel search to see if I could get more channels.  After the search, I was only getting the regular channels.  When I land on a HD channel, it says no signal.  I have found ...

directly to the cable network. Tested and verified solution: Set Tuner Mode to "antenna".Run a channel scan. Should get zero channels found.Set Tuner Mode to "cable".Run another channel scan.Celebrate

No digital channels after running auto search I have a Vizio 37 inch. It is connected directly to cable with a signal from Comcast. I ran auto search because of the many new digital channels. I had ...

...run the Vizio set up again. Select that you are running "Cable TV" but when it asks from the "wall" or Cable Box" select "WALL" and let it do it's scan. ***************** The scan takes a while but ...

...channel programming has not been done yet. You must run cable TV directly into set and let the set do the auto programming. If you are using a " Cable Box " You can not auto program and must use the ...

channels programmed in. In the menu for the TV, run a channel scan. This will take probably 30-45 minutes for most TVs and will program the available channels into the TV so that they become available

i cannot get the channel scan to recognize channel 3 to be able to watch directv Make sure the direct TV is turned on and has a channel selected before running the auto scan. The TV won't see channel ...

Stuck on one channel The remote only works to change the volume. Used the buttons on the side of the TV to go to Menu, TV, scan channels. Process took several minutes, but when done, it's still stuck ...