Questions & Answers for: Sony channel run

tv channels I cannot get all of my cable channels. It only goes to 21 and stops pulling in channels try running the channel setup in the menu.

vertical line running through video channels 1-4 Sony has a white vertical line running down screen on video channels (ports) 1-4. Video port 5-7 shows no line. Cable television is viewed on 5 with no

How to set SONY TV # KLV-S32A10 to receive HDTV channels? I want to see new HDTV channels using an antenna. Can we do this directly, or must we purchase another box? the new lcd tv you have will pick ...

...channel, the other coil to the other channel. single 2 ohm. dont use it unless you get another sub like what you have. then run it stereo. one sub to one channel. the other sub to the other

...bridged so as to run just the one channel ? No, because the would require bridgeing the front channels and this amp does not allow for that. Rear only so it can only operate in a 3 or 4 channel

... 250W x 1 @ at 4 Ohm This will allow 2 channels to run 100 watts each @ 4ohms with an additional single channel with 250 watts @ 4 ohms. The single sub channel is created by bridging channels 3 & ...

...get channels after 17 how do I get the rest of the channels In the menu, select "Channel Set Up", then set the "Cable" option to OFF. Finally, run "Auto Program" to find all available channels.

...run a 4OHM load into one channel. This will give you all the power the amp can give and still run stable. A 2OHM load into one channel will likely damage your amplifier. Do not forget to set the LPF ...

run channel auto scan The Auto Program Channel Scanning function will not pickup the same channels as previously programmed. The auto scan feature scans the various channel frequencies looking for a ...

...channel search option to find all possible digital channels. That appeared to run normally as well. We periodically have run these features before with no problem. However, when we were surfing ...