Slow fill with dishwasher The machine works, just takes forever. Water coming out of the tap. Access to the inlet solenoid shows volts hitting the solenoid and it sounds like its working but only a ...
Question about Nexxt Premium WFMC6400UC Front Load Washer
Start/Pause indicator flashes-Text Ready but machine does not start. We've own this thing for over four years. Recently, Start/Pause indicator flashes-Text Ready but machine does not start. The door ...
Bosch Axxis WFL 2060 washer leaks My five year old Bosch Axxis WFL 2060 frwasher has started leaking at the lower left corner. Have reduced the amount of soap used and still have problem. Not leaking ...
Question about 3.81 cu ft WFMC530 1UC Nexxt 500 Plus Series Washer
...washer and one I could manually reset. This is the first front loader I bought and at this rate will never purchase another. I have no children at home and it is not used very hard, so there are also ...
Question about Nexxt 700 Series WFMC6401UC Front Load Washer
tap & turned the cold back on & you can hear the machine but no water. Took off the hoses & checked to make sure not clogged. These are the original hoses & it appears that the flap to
Question about Classixx WFL 2066 Front Load Washer
My unit is a paloma tankless model # PTG-74PVP its throwing error code C4 15 what does this mean? We believe its a flow problem because we hooked up an external pump, it starts out with full flow then
Question about Axxis+ WFR 2460 Front Load Washer
...tap closed, is this electrical, checked incoming hoses , water and screens If you have checked the hoses and screens then the most probable failure is the inlet water valve. I suspect that one ...
Question about Axxis+ WFR 2460 Front Load Washer
tap is closed, checked the hoses and screens I am not sure why but there are 2 posts for your question. This is a duplicate of my original answer: If you have checked the hoses and screens
Question about Nexxt 100 Series WFMC1001UC Front Load Washer
washer is supposed to be filling with water, it does just a little. then it washes but when it spins it does not spin enough to get all the water out of the clothes. spins slowly. a few things to try.
Question about Aquastar 125X Main Burner NG w/ Washer - Part 8708120298
main burner fire does not ignite despite good pilot fire, new thermocouple ?? Although the pilot light fires up briskly in response to a hot water tap opening and the ignitor continues to ...
Usually answered in minutes!
522 Questions
457 Questions
351 Questions
272 Questions
222 Questions