Questions & Answers for: Brother HL changing the drum

...on. Then realease the button and close the front panel. Your coutner will be resetted. Changing with brand new brother never used drum and toner and reseting drum counter should fix light expalin ...

Printing on half page only Hello, I just replaced the drum unit and did the drum reset procedure. Now when I print it only prints on the left hand side of the page and its very faint. It was printing ...

...the High Yield TN660 toner is your printer, then the drum needs changing every 3-4 toners. If using the low yield TN6300 toner then your drum needs to be replaced every 6-7 toners. Hope this ...

drum after changing are packed with the new drum, and the belt unit is the transfer belt that also wears out and needs changing periodically. The instructions are packed with that also and not hard to

BROTHER HL-7050 CHANGE DRUM STILL INDICATES CHANGE DRUM you need to reset drum counter by pressing go & + together "reset parts life" "drum unit" then press "SET" button. that's it.

...company you got the drum from incase its faulty. failing that i would suggest changing the toner cartridge as well as this tends to solve the problem when we experience it with printers at our

drum light is bleeping. changed the toner, still bleeping You need to change the drum, which is a separate part than the toner. see http://www.nextag.com/brother-5250-drum/stores-html Lights don't

how do I change the drum in my HL-5240 how do I change the drum in it myself? First check whether it is possible to buy a new drum for your model, if possible buy a new drum then remove the toner from

its telling me to change drum unit on all coulors ? hw do i fix it ? Need to change all the drums, but you can keep your old drums just reset the printer but your print quality will not be the best, ...

...drum need changing The drum is where the images are created, a good drum means good printing quality, is sensitive to light, do not expose to sunlight directly and also expose to the light as less as ...